How much water is boiled in an electric kettle

Usually, when the water is just boiled, it is 100 ℃, and it cannot be raised if desired. The specific temperature of 100 degrees depends on the internal temperature controller. The working temperature of a general temperature controller is 105 ℃. After deducting conduction losses and errors, the water will automatically cut off power and stop heating when it boils down to 100 degrees.

1、 How to use an electric kettle to boil water?
1. Pour water into the pot, connect the power cord to the pot body, and then plug the other end into a power socket to heat it. For electric kettles with a switch or automatic control, unplug the switch to turn on the power. Be careful not to turn on the power before loading water, otherwise it may burn out the heater or cause a dangerous accident.
2. The water should not exceed the maximum water level to prevent the liquid from overflowing the kettle when boiling. When using a regular electric kettle, it is not advisable to add too little water, otherwise it will quickly burn out. If the electric heating tube is exposed to the water, it is easy to burn out.
3. The rated power of an electric kettle is generally high. The capacity of power plugs, sockets, and power cords should be appropriately selected, should be above 10-15 amperes, and should be used independently to ensure safety.
4. Regularly keep the power plug, socket, power cord, and automatic switch device of the electric kettle dry and clean. Do not rinse with water to avoid damaging the electrical insulation due to moisture, causing malfunctions and leakage.

5. Flushing or flushing with a freshly boiled electric kettle can easily cause injury. First unplug the plug, cut off the power, and then take out boiling water to ensure safety.

Female2、 How is drinking water healthy?
1. The water should completely boil.
When boiling water, looking at the water surface about to boil, I think the water is boiling. At this time, the toxicity of the water is high and it has not been fully boiled. It should be boiled for a while before drinking.
Female2. The boiling time should not exceed 15 minutes.
In order to eliminate bacteria and viruses in water as much as possible, reduce the hardness and nitrite content of drinking water, the boiling time of hot water should be controlled within 5-10 minutes. If the boiling time exceeds 15 minutes, or if the water heater in a public place repeatedly boils.
3. Let the tap water run for a while before burning it
If using tap water to boil water, it should be noted that after chlorination and disinfection of tap water, the combination of chlorine and organic compounds in the water can produce various carcinogens such as halogenated hydrocarbons and chloroform. When boiling water, take out the tap water and let it sit for a while before boiling, which can accelerate the volatilization of harmful substances.