How to repair the broken electric kettle?

Nowadays, almost every family hasElectric kettle. Boiling water is very convenient and is a necessary small appliance in families, but these small appliances may have some minor malfunctions in the market. If you go to the store for repairs, it will be too expensive. It's better to buy a new one yourself, some people may choose to throw it away directly. Anyway, it's cheap, but many people actually don't know that these small problems with electric kettles are easy to fix and don't need to be thrown away at all. How to repair the broken electric kettle? These three types of faults can be fixed by oneself!
Previously, the hot water kettle at the editor's house was also broken and had to be repaired. The teacher downstairs, Fu, told me that these malfunctions were actually easy to repair.
1. No heating when the light is on

I believe many people have encountered this problem, which is a common fault. When the electric kettle is plugged in, the indicator light shows that it is boiling water, but the kettle has not been moving for a long time, and it has not been boiling water at all. This situation is mainly due to poor contact between the heating tube and the connection. In this case, we can remove the switch and there will be a spring metal plate inside. If it deforms or corrodes for a long time, then we only need to adjust or replace the metal sheet.

2. The light is not on and does not heat up
Many people believe that encountering a situation where there is neither light nor heating is impossible to repair. In fact, this situation usually occurs when the metal plate spring inside the insulation switch of the electric kettle is pressed onto the touch rod on the switch. We just need to pull the metal spring up and bend it slightly to solve the problem. Sometimes it is also because there is dirt at the contact point, as long as you clean it with a brush, you can continue to use it.
Female3. Keep boiling with water
The problem is that the water has already boiled, but the electric kettle has been working. Simply put, electric kettles do not automatically trip and can be dangerous if burned continuously. If someone is not around, the water in the electric kettle may continue to burn, not only damaging the kettle, but also causing a fire due to dry burning, seriously endangering physical and mental health. This situation is actually due to a problem with the temperature sensor of the hot water kettle. Usually due to deformation or switch failure. After deformation, directly break the temperature sensor. If the switch fails, the linkage will be readjusted. If there are foreign objects blocking, clean them directly.
FemaleAdditionally,Electric kettleWhen boiling water, do not fill it too full, about 80% of the amount is enough. This way, the water will not overflow after boiling, and there will be no unnecessary danger. After boiling, do not rush to pour the water, and it can be left for a few minutes to settle impurities in the water. Additionally, it can allow the electric kettle to slowly cool down!